Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Submerged waste water pump TWP 7536 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged waste water pumps
  6. TWP 7536 E

Submerged waste water pump TWP 7536 E

Power pack (max. 12,500 l/h) for pumping out waste water indoors and outdoors – with an adjustable residual water level

The power pack for pumping water in the house, garden and business

As wonderful as the summer with its warm temperatures may be, it also has a dark side. If it is permanently too hot, the lovingly tended garden plants will die of thirst and the formerly green lawn will burn in the blazing heat unless it is watered for several hours every day. The submerged waste water pump TWP 7536 E provides a remedy here, for it enables you to pump freely available service water (with dirt particles sized up to 25 mm) from the garden pond, a stream or a rainwater cistern for watering your garden. Conversely, the submerged pump also helps when it rains too much. Continuous rainfall and storms in summer are a frequent cause of flooded streets, water flooding in the garage and cellars full of waste water. Blessed is one who is prepared for such capricious weather conditions. With the robust pump TWP 7536 E, which is protected against the ingress of water by IPX8 type of protection, you can dry out even heavily flooded basements and garages in the shortest possible time.

Rises to every challenge and water quantity

Whether for pumping out the basement after continuous heavy rain or for using free service water from ponds, streams and rainwater cisterns for watering the garden – the 750 W submerged pump TWP 7536 E is an indispensable helper for homeowners and hobby gardeners for quickly pumping out or recirculating large quantities of waste water.

Submerged waste water pumps of the TWP series at a glance

One of the most important criteria when selecting a submerged waste water pump is the pump capacity. Therefore, before purchasing, check whether the flow rate and delivery head are suitable for your application. Submerged pumps with a lower flow rate, such as our TWP 4036 E, are also available from Trotec, just like pumps with a higher output and high-quality stainless steel design, e.g. the TWP 9000 ES and TWP 11000 ES.

Continuous operation and manual operation with preselected switch-on/switch-off height

The submerged pump, which is equipped with a watertight (encapsulation) and impact-resistant plastic housing, is designed for underwater application to an immersion depth of 7 metres. From a water level of 85 mm, the submerged pump starts pumping until the residual water level of max. 40 mm is reached. In addition, the submerged pump can be used in manual operation with an individually preset switch-on and switch-off height. A float switch lock on the pump housing allows individual adjustment of the pumping height within a defined range. If the otherwise freely movable float switch is fixed, the TWP 7536 E will pump water continuously.

Universal connection for hoses, pipes and plug-in systems

With the submerged waste water pump TWP 7536 E you can go for "all in one" instead of "either or" when it comes to choosing the connection options. No matter whether you want to connect the pump to a garden hose, an existing piping or irrigation system – the TWP 7536 E offers almost unlimited compatibility. The submerged pump allows the connection of hoses, tubes and plug-in systems with different diameters, with and without threaded connections. The reduction required for this is already included in the scope of delivery with various connection sizes. 

Flexible all-rounder: 360° elbow with Quick-Connect connection

The convenient elbow will turn your head. With it, hose, tube or plug-in systems can be attached to the pump quickly and easily with just one movement and flexibly positioned at any angle. Simply plug it in and remove it again at the push of a button when the work is done.

Connection options of the TWP 7536 E:

  • Hose connection for an inner diameter of 25 mm or 38 mm 
  • Hose and pipe connection for internal threads G1"/DN25 or G1½"/DN40

For self-pumped water and drainage work – everywhere

With the carrying handle integrated in the pump housing, the pleasantly compact and only 5 kg light TWP 7536 E offers extreme mobility in the garden or at other locations. Additionally, the handle serves as a suspension for the nylon cord (10 m) included in the scope of delivery to lower the submerged pump into wells, cisterns or other basins.

Tested for safety for long-lasting use

The submerged pumps of the TWP series are robust and durable pumps designed for continuous operation in harsh environments. The motors, which are both powerful and maintenance-free, have an integrated thermal protection circuit to gently switch off the pump technology in the unlikely event of overheating.

Extensive accessory set – already included in the scope of delivery

Why pay extra for something when it is already included in Trotec's scope of delivery? The submerged waste water pump TWP 7536 E is supplied ready for connection including all necessary accessories:

  • 1 x Submerged waste water pump TWP 7536 E
  • 1 x Reducer for hoses with inner diameters of 25 mm or 38 mm as well as hose connections with G1"/DN25 internal thread
  • 1 x Elbow for hose connections with G1½"/DN40 internal thread
  • 1 x Quick connection for elbow
  • 1 x Nylon cord (10 m)
  • 1 x Manual

Unpack, plug in and get started!

With the submerged pump TWP 7536 E you can rely on top performance when pumping out or recirculating large quantities of water in the garden or in flooded basements.

Special equipment features of the TWP 7536 E

Particle size: 25 mm
The submerged waste water pump TWP 7536 E conveys heavily contaminated water with particle sizes of up to 25 millimetres.
360° adjustable elbow
The elbow's position can be freely adjusted by 360°, so that it is possible for hoses and pipes to run parallel to the ground.
Universal connections
Hoses and pipes with an inner diameter of 25 / 38 mm as well as 1'' / 1½'' threaded connectors can be flexibly coupled with the pump.
Steplessly adjustable float switch
The float can be fastened in any position, this increases the flexibility when setting the switch-on/switch-off point.
Continuous suction operation to a level of 40 mm
When locking the float switch in horizontal position, the pump operates continually and sucks off the water to a level of 40 mm.
Quick-Connect connection
Thanks to the Quick-Connect connection, 25 / 38 mm hoses (1" / 1½" thread) can be mounted quickly and easily.
Scope of delivery
The submerged pump TWP 7536 E is supplied with a reducer, a 360° elbow incl. quick connection as well as a 10 m nylon cord for lowering the pump.
Schematic overview
TWP 7536 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, delivery head and submersion depth.

The TWP 7536 E is extremely versatile

Perfect for draining ponds
Water volumes even of large garden ponds can be pumped off quickly and easily at a rate of up to 12,500 litres per hour.
Application in flooded living rooms and basements
Your living spaces or basement have been flooded by heavy rainfall? The water to be pumped out is no problem for the submerged waste water pump TWP 7536 E.
Technical data in comparison

All submerged pumps in direct comparison:

To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 750 watts of power for pumping up to 12,500 litres per hour
  • Maximum delivery head: 8 m
  • Ideally suited for the withdrawal, recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
  • For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Fixing option for the float switch for automatic operation
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Incl. 360° elbow and hose adapter
  • Easy hose connection thanks to Quick-Connect system
  • Large ergonomic carrying handle – suitable for fastening the suspension cord

All important features at a glance

Clean water
Contaminated water
Powerful 750 W motor
Flow rate of 12,500 litres per hour
Delivery head of 5 metres
Immersion depth: 7 metres
A water level of no more than 85 mm is sufficient for starting the device
The device continues to operate to a residual water level of 40 mm
Heavily contaminated water with particle sizes of up to 25 millimetres
Universal connections for inner diameters of 25 mm and 38 mm
Threaded connectors of 1'' and 1½''
Quick-Connect system
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Sturdy, ergonomic carrying handle
Nylon lowering cord of 10 m length
Cable length: 10 metres
For the application in swimming pools
For the application after flooding
For the application in drainage shafts
For the application in garden ponds
Scope of delivery for the submerged clear water pump TWP 7536 E

The submerged pump TWP 7536 E is supplied as complete set including reducer, 360° elbow, quick connection for elbow, 10 m nylon cord and 10 m power cable.


Delivery head and flow rate

Delivery head and flow rate of the TWP 7536 E

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Owing to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

Tested for safety, TÜV GS ID 1111232605

Differences between our submerged waste water pumps TWP 7025 E and TWP 7536 E

Submerged pump: TWP 7025 E TWP 7536 E
Particle size 25 mm 25 mm
Residual water level 35 mm 40 mm
Quick-Connect connection for elbow
Inner hose diameter 25 / 32 mm 25 / 38 mm
Threaded connectors 1" / 1½" 1" / 1½"
Backflow stop valve

Buy

Submersible waste water pump TWP 7536 E show in Trotec online shop

Submersible waste water pump TWP 7536 E

You save: 20 %

74.95 £ 59.95 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 4.610.000.054
Electrical values
  Mains connection 230 - 240 V, 50 Hz
  Power input [kW] 0.75
Electric connection
  Connection plug CEE 7/4
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 12,500
  Grit of pump [mm] 25
  Max. delivery height [m] 8
  Max. submersion depth [m] 7
  Minimum operating depth [mm] 85
  Max. water level after suction [mm] 40
  Max. water temperature [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On/off switch (float switch) Automatic
  Switch-on point float switch [mm] 600
  Switch-off point float switch [mm] 150
  Thermal overload protection
  Backflow preventer
  Suitable for both permanent operation (>10h) or salt-water operation
Housing design
  Plastics
Accessories scope of delivery
  Adapter
  Hose connection (inner diameter) 25 / 38 mm
  Threaded connection 1";1 ½"
  Backflow preventer
Dimensions
  Length (packaging excluded) [mm] 220
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 370
Weight
  (packaging excluded) [kg] 5

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...