Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

TCH 1 E
Home Comfort
  1. Products & Services
  2. Products ‑ HomeComfort
  3. Heating
  4. Convectors TCH-E series
  5. TCH 1 E

Convector TCH 1 E

Compact frost monitor for heating smaller rooms

Economical heating capacity of 520 W for clean, non-condensing and odourless heat

Used at home, in the office or the hobby workshop – the TCH 1 E provides agreeable feel-good warmth. The small convector is a very convenient heating solution even in a restroom or during your camping holiday in a camper van or caravan. With its frost monitor function the compact, rapid heater is moreover excellently suited to generate warmth in otherwise unheated small rooms, to prevent excessive cooling via thermostat control and to keep water lines from freezing up.

Cost-efficient heat generation using a power saving function

Regardless of whether the heater is used for the unattended operation as frost monitor, as an additional heat source on cold days or as the sole heating solution in rarely occupied rooms:

With its heating capacity of 520 watts the TCH 1 E is a remarkably cost-efficient heating solution. When the target temperature previously set via the infinitely variable thermostat is reached, the convector automatically switches off and back on again as soon as the temperature drops below the defined value. Therefore, you only heat as much as is necessary whilst saving energy costs as effectively as possible!

Clean warmth generated in a breath

The start-up of the TCH 1 E could hardly be any simpler: All it takes is to unpack the device and to plug it in. Then you can set the desired target temperature via the thermostat at the side of the device and the TCH 1 E will immediately start the clean, odourless and noiseless heating operation in automatic mode.

The TCH 1 E impresses with many practice-oriented details:

TCH 1 E - Operating control lamp
Simply by looking at the operating control lamp you can tell –even from afar – whether or not the device is switched on
TCH 1 E - Thermostat
Infinitely adjustable thermostat – automatically switches the device on and off to maintain the temperature
TCH 1 E - Discharge grille
Large discharge grilles for maximum convection
TCH 1 E - Carrying handle
Convenient carrying handle for a quick change of location
TCH 1 E - Feet
Large feet for secure footing, included in the scope of delivery and ready for installation
TCH 1 E - Immediately ready for use
Just set it up, plug it in, and you’re done.
TCH 1 E - energy efficient operation
Energy-efficient operation thanks to automatic switch-off upon reaching the set value
TCH 1 E - automatic mode
Thermostat-controlled automatic operation

Convectors TCH-E series

All Convectors TCH-E series in direct comparison:

To find the Convector of the TCH-E series which exactly meets your requirements, please consult the concise overview of all Convectors TCH-E series from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Economical heating capacity of 520 W for clean, non-condensing and odourless heat
  • Infinitely variable thermal control
  • Thermostat-controlled automatic operation
  • Frost monitor function
  • Energy-efficient operation thanks to automatic switch-off upon reaching the set value
  • Particularly easy handling
  • Overheating protection
  • Noiseless heating
  • Secure footing due to large feet

Frost monitor function

Frost monitor function

Ideal for short-term property vacancies or temporarily used rooms

Using the stepless thermal control of our mobile TCH convectors, you can also operate the devices in frost monitor operating mode. The heating device is then automatically activated by a thermostat to protect the rooms from frost and prevent excessive cooling. Functioning as frost guards, the TCH convectors are not only ideally suited for landlords and real estate companies – they also offer benefits for private and business people, who can thus keep vacant rooms and garages free from frost. Particularly rooms, conservatories or cellars which are not connected to a central heating system can be kept warm reliably this way.

BN30

Optimum room temperature control with the socket thermostat BN30

Just install it in the socket and connect it to the heating or cooling device on the socket thermostat BN30, and you can have your heating or cooling unit automatically switched on and off by the BN30 depending on the temperature. The socket thermostat available as an accessory is individually adjustable within a temperature range from 5 °C to 30 °C.

Radio thermostat BN35 with timer switch for the socket

Radio thermostat BN35

With the radio thermostat BN35 you can easily determine at which room temperature your heating or cooling unit will switch on or off using the remote control. The BN35 set consists of a radio-controlled socket and a radio thermostat. Simply plug the radio-controlled socket in between a wall outlet and your heating or cooling unit. Place the radio thermostat within approx. 20 metres in the place where the room temperature is to be measured. As an alternative, time-controlled regulation can also be carried out.

Buy

Convector TCH 1 E show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.410.000.501
Heating capacity
  Level 1 [kW] 0.45
  Level Max. [kW] 0.45
Electrical values
  Mains connection 220 - 240 V, 50 Hz
  Max. power input [W] 500
  Nominal current consumption [A] 2.17
Safety feature
  IP type of protection IP20
  Protection class I
  Overheating protection Available
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
Mobility
  Feet
  Carry/transport handle(s)
Dimensions
  Length (feet included) [mm] 177
  Width (feet included) [mm] 275
  Height (feet included) [mm] 276
Weight
  (packaging excluded) [kg] 1
Equipment, features and functions
Functions and features
  Adjustable thermostat
  Frost monitor function
  Operating control lamp
  Thermostat-controlled automatic operation
  Automatic switch-off upon reaching the set value
  Auto restart function
  Turbo blower
  24 h timer
Operation
  Steplessly adjustable thermostat
Housing design
  Sheet steel – coated

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...
This product is only designed for use inside well insulated rooms or for occasional use.