Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Oil heater fan IDE 80
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDE series
  5. IDE 80

Oil heater fan IDE 80

Our most powerful indirect oil heater fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops!

Oil heater fan IDE 80
Oil heater fan IDE 80
Oil heater fan IDE 80

So much hot air for so little money – this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture.

The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating closed rooms. The IDE 80 is fired either with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump.

Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

A built-in thermostat with a dual display for the actual and the nominal value is provided for temperature control. Another external thermostat with a 25-metre connection cable is available for applications in which the oil heater fan shall not be positioned in the area to be heated.

The oil heater fan IDE 80 is, of course, also excellently equipped for outdoor heating: The smooth-running carriage construction with cable holders and a fuel tank as well as the durable, double-coated housing make it as mobile as weatherproof.

IDE indirect oil heaters – maximum heating power, clean warmth

The indirect oil heaters of the IDE series are ideally suited for rooms in which ventilation is only possible to a certain extent, but which still are to be used by people and animals. They are also a good choice for speeding up construction drying as well as in rooms where there is a fire hazard due to combustible substances.

In case of indirect heaters, the air to be heated is completely isolated from the combustion chamber.

The air is heated while flowing past the enlarged area of the combustion chamber, the heat exchanger. To be sure, the fan blowing out warm air also provides the required combustion air, but the combustion products are led away into the open air through a chimney.

Thus, in order to obtain both clean and dry warmth, we recommend using an indirect heater.

Unlike direct heaters, they do not emit any combustion products or water vapour into the room air, provided that the optionally available flue gas discharge is used.

Schematic diagram indirect heaters

VIDEOS: Trotec oil heater blowers live in action

In our Youtube playlist we have compiled exciting projects that users have realised with Trotec oil heater blowers. The application possibilities are manifold and the tinkerers have implemented their personal vision of a warm working environment with a lot of ingenuity and commitment. Very inspiring!

VIDEOS: Trotec oil heater blowers live in action

Special equipment features

The temperature can be adjusted as required via a stepless thermostat control. An additional dual display informs you of the nominal and actual value.
Electronic thermostat
The IDE 80 comes equipped with a readily accessible external fuel filter. The filling level of the integrated fuel tank can be checked anytime via the standard liquid level indication.
Tank filling level indication
To ensure constant firing of the stainless steel combustion chamber, the fuel supply of many IDE devices is effected by means of a high-quality Danfoss® injection pump.
Oil heater fan IDE 80
The oil heater fan IDE 80 is equipped with a connection for an external thermostat if the temperature is to be measured and controlled at a location to be heated that is up to 25 metres away (a thermostat is optionally available).
Connection for an external thermostat
Instead of the stainless steel chimney, an optional flue pipe can also be connected to remove the combustion air.
Stainless steel chimney
The carriage accommodates two practical cable holders so that transport can be carried out safely and without trip hazards.
Cable holder
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating


A few practical benefits:

  • Particularly economic solution for standard oil heating
  • Integrated fuel tank with filling level indication
  • Electronic flame trap
  • Overheating protection
  • Stainless steel combustion chamber
  • Integrated thermostat with dual display for actual and nominal value
  • Connection for external thermostat
  • Carriage for easy change of location
To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator


Technical data by comparison

All IDE oil heater fans in direct comparison:

To find the oil heater fan which exactly meets your requirements, please consult the concise overview of all oil heater fans of the IDE series from Trotec, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Buy

IDE 80 Oil Fired Indirect Heater show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.430.000.240
Functional principle
  Oil
  Method of heating indirect
  Method of heating direct
Air flow rate
  Level Max. [m³/h] 2,000
Fan
  axial
Nominal heat output
  Level Max. [kW] 80
  Level Max. [kcal] 68,800
Temperature increase
  Level Max. [°C] 105
Electrical values
  Mains connection 230 V, 50 Hz
  Current consumption [A] 3.3
  Power input [kW] 0.9
  Heating capacity [kW] 80
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.2
Operation
  Internal thermostat
  Connection for external thermostat
  Temperature indication
Fuel feed
  Fuel feed Danfoss pump
Fuel filter
  Available
Oil consumption
  Level Max. [l/h] 7.6
Tank contents
  Content [l] 68
Hose connection
  Diameter | Hose connection [mm] 400
Chimney connection
  Available
  Diameter | Chimney connection [mm] 150
Sound values
  Distance 1 m [dB(A)] 80
Suitable fuels
  Diesel
  EL fuel oil
  Low-sulphur EL fuel oil
  Kerosene
Dimensions
  Length (packaging excluded) [mm] 1,370
  Width (packaging excluded) [mm] 560
  Height (packaging excluded) [mm] 995
Weight
  (packaging excluded) [kg] 59
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Wheels
  Stand bar
Housing design
  Steel
Safety feature
  Overheating protection

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...

Videos