Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Deep well pump TDP 5500 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Deep well pumps
  5. TDP 5500 E

Deep well pump TDP 5500 E

Powerful 1,100 W stainless steel pump (INOX) with a flow rate of up to 6,000 l/h

PUMPING SERVICE WATER TO WHEREVER IT CAN BE OF SERVICE

Become independent of the local water supplier and rising costs by using the high-quality deep well pump TDP 5500 E. For this much is certain: Tap water will always be more expensive. Reason enough to make use of alternatively available water sources such as rain or ground water to save money. With its 1,100 watts of power and a delivery head of 58 metres the slim deep well pump TDP 5500 E in stainless steel design transports up to 6,000 litres of service water per hour from wells, water reservoirs, rainwater cisterns or drainage shafts. Deep well pumps are specifically made for pumping water from great depths.

Independent thanks to natural resources

Utilize ground water that is available free of charge to water you garden or operate lawn sprinklers and other irrigation systems. The deep well pump can also be used as complementary measure for a more cost-effective domestic water supply. For example it can be used as alternative water source for the operation of your washing machine or to flush the toilet. Pumped, no-cost service water is not of inferior quality. The integrated dirt strainer of the deep well pump TDP 5500 E ensures clean water with filtered out dirt particles. On top of that, rainwater is softer and contains less lime than standard tap water which proves beneficial for washing machine and water-bearing lines and components in general.

ENVIRONMENTALLY SOUND AND BUDGET-FRIENDLY

Your decision to purchase a TDP 5500 E deep well pump is definitely the right choice and an investment in the future – not just in the light of global warming and climate change. Water is and will remain a valuable asset that should be treated responsibly and sparingly. Instead of using elaborately treated drinking water to wash your dishes and laundry or to water your plants you can make an active contribution to environmental protection by using rain, ground or service water.

Trotec's deep well pumps are highly efficient submersible pressure pumps which – due to their special design and high-quality technology – can be used in drilled wells with a minimum diameter of 11 centimetres. For the unproblematic water transport from great depths the standard equipment contains a connection cable of 23 metres length and suspension eyes for lowering the pump into wells, cisterns, drainage shafts or similar. Like all submersible pressure pumps our deep well pumps, too, are optionally suited for either fixed installation or the mobile application at various sites.

Saving tip:

In the long run self-pumped water saves money. The investment for installing a well in your own garden (if not already present) will quickly redeem itself over the course of only a few years – depending on the individual usage intensity. Specialized well builders can help you in the planning and construction phase of your own garden well.

HIGH-QUALITY TECHNOLOGY, EXCELLENT WORKMANSHIP

A robust housing made of stainless steel protects the TÜV-tested, maintenance-free copper motor. High-end workmanship guarantees a smooth, long-lasting operation of the pump in continuous underwater application. Designed for year-round operation, the TDP 5500 E comes equipped with a stainless steel dirt strainer that provides protection against the contamination with particles to a size of 2.3 mm, a check valve with backflow preventer and a thermal protection circuit.

Extremely practical:

The 23 m underwater cable permits a convenient power supply and the external control box with on/off switch can be operated safely from a location that is far away from the pump's installation site. For lowering the pump into the water to be conveyed using a rope the pump housing has two practical suspension eyes located at the top of the device.

SUBMERSION DEPTH, DELIVERY HEAD AND FLOW RATE

With a high pressure of max. 5.8 bar, a maximum delivery head of 58 metres and a submersion depth of up to 20 metres the TDP 5500 E comes optimally prepared for pumping clear water from wells, shafts and other alternative water sources situated at great depth. Due to their compact diameter of only 100 mm the pump can be used in narrow bore hole diameters starting at 110 mm.

Better safe than sorry: dust- and water-proof 

When water and electricity flow through a device at the same time, state-of-the-art protection measures are a must. With a deep well pump of the TDP series in watertight encapsulation you are always on the safe side. The deep well pump TDP 5500 E is dust- and water-proof as per protection type IP68. Accordingly, the pump can be left inside the well even during periods of non-use. Thanks to protection type IP44 the splash-proof control box can also be assembled in outdoor areas sheltered from the rain.

Special equipment features of the TDP 5500 E

TDP 5500 E – for bore holes starting at 11 cm
With a diameter of only 10 cm the slim deep well pump can already be inserted in bore holes of minimally 11 cm.
TDP 5500 E – 1 ¼" threaded connection
The high-quality pressure connection brass thread is suitable for hoses of 1 ¼". The pump is equipped with a copper motor, valve and integrated thermal protection circuit.
TDP 5500 E – dirt strainer
The dirt strainer is also made of stainless steel. It prevents the intrusion of particles sized larger than 2.3 mm and protects the pump from damages caused by sand and dust.
TDP 5500 E – control box
The pump can be safely and conveniently operated via the external splash-proof control box. The integrated overload switch protects the device from damages caused by excess voltage.

Finding a suitable deep well pump that meets your individual requirements

The water consumption of a lawn sprinkler depends on the hose diameter and the feed pump's water pressure.

Here is a rule of thumb for determining at least an approximate water demand: A customary lawn sprinkler needs roughly 800 to 1,200 litres of water per hour*

*depending on the water pressure

The further up the deep well pump has to transport the water, the lower will be the water pressure and the maximum flow rate in litres per hour. For this reason you should make sure the pump you choose is sufficiently dimensioned. Calculate the anticipated water demand and then decide in favour of the TDP deep well pump that best meets your individual requirements.

The deep well pump TDP 5500 E transports up to 6,000 litres per hour which – depending on the delivery head – is sufficient for the simultaneous water supply of several sprinklers.  

If you want to make use of a smaller number of sprinklers, but they are located further away from the well, we recommend the deep well pump TDP 7500 E – it achieves a delivery head of up to 93 metres. With a flow rate of 4,800 litres per hour it also permits a sufficient pressure level for the parallel operation of several lawn sprinklers.

The ideal supplement: Pressure switch for automatic pump control

With an electronic pressure switch you can control your water pump automatically without having to switch the pump on or off manually. The pressure switch monitors both the water pressure and the flow rate in the pipe and switches the pump connected on and off automatically when the tap or garden hose is used. In addition, the pressure switch protects the pump against running dry and in this way extends its service life. For our garden pumps of the TGP series we recommend using the electronic pressure switch TDP DSP as a convenient Plug & play solution. With their integrated mains power socket the Trotec garden pumps can be easily connected to the pressure switch using a mains plug. For Trotec's deep well pumps of the TDP series we offer the pressure switch TDP DS. Its open cable end is connected directly to the control box of the deep well pump and the pressure switch can control the water delivery automatically. Also choose reliable Trotec brand quality when you need a pressure switch!

Pressure switch TDP DSP
Pressure switch TDP DS
Deep well pumps

All Deep well pumps in direct comparison:

To find the Deep well pump which exactly meets your requirements, please consult the concise overview of all Deep well pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 1,100 watts for pumping up to 6,000 litres per hour
  • Maximum delivery head: 58 metres
  • Maximum pressure: 5.8 bar
  • Ideal for pumping clear water from a well, rainwater cistern or shaft
  • For effortless service water supply or irrigation purposes in the house (washing machine, toilet) or garden (lawn sprinklers, irrigation systems)
  • Pump housing made of stainless steel
  • Robust pressure connection with brass insert
  • Extremely durable thanks to rust-proof stainless steel housing and copper motor
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Stainless steel dirt strainer
  • IP68 type of protection for the pump – dust-proof and suitable for continuous underwater use
  • IP44 type of protection for the control box – splash-proof
  • External switchbox
  • Reliable check valve preventing backflow of the conveyed medium
  • 2 suspension eyes for lowering the pump into the well hole using a rope
  • 23 m underwater cable

All important features at a glance

Ground water
1,100 watts power input
Flow rate of 6,000 litres per hour
Delivery head of 58 metres
Submersion depth max. 20 m
A water level of no more than 783 mm is sufficient for starting the device
Ground water with particle sizes of up to 2.3 millimetres
The diameter of the bore hole amounts to no more than 110 mm.
1 ¼" threaded connection
Integrated backflow preventer
Cable length: 20 metres
well water
For the application in drainage shafts

Delivery head and flow rate of the TDP 5500 E

Delivery head and flow rate of the TDP 5500 E

Best quality guarantee

With the TDP 5500 E you are always on the safe side, for this deep well pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application:
these are some of the quality features of Trotec's deep well pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

TÜV – Tested for safety

A suitable pump for any application scenario

Do you need a deep well pump for an even deeper well? If your answer is yes, we recommend the TDP 7500 E with a delivery head of 93 metres and a conveying capacity of 4,800 litres per hours.   Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E, TWP 7505 E and TWP 9005 E recommend themselves with a delivery head of up to 11.5 metres and flow rates ranging up to 14,000 litres per hour. With a delivery head of up to 11 metres and flow rates of up to 15,000 litres per hour the submerged waste water pumps TWP 4025 E, TWP 7025 E and TWP 11025 E from Trotec are also suitable for pumping contaminated water. With a delivery head of 42 metres and a flow rate of 3,300 litres per hour the garden pump TGP 1000 E comes optimally prepared for watering applications.  Without difficulty the domestic water supply system TGP 1025 E can be integrated into an existing domestic supply network and reaches a delivery head of 30 metres as well as a flow rate of 3,300 litres per hour.

Buy

Deep-well Pump TDP 5500 E show in Trotec online shop

Deep-well Pump TDP 5500 E

You save: 50.00 £

249.95 £ 199.95 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 4.610.000.210
Electrical values
  Mains connection 220 - 240 V, 50 Hz
  Max. power input [W] 1,100
  Pump capacity [W] 550
Electric connection
  Cable length [m] 23
Performance data
  Max. conveying capacity [l/h] 6,000
  Feed pressure [bar] 5.8
  Grit of pump [mm] 2.3
  Solids content in water [%] 0.25
  Max. delivery head [m] 58
  Number of phases 1
  Max. water temperature [°C] 35
  Max. submersion depth [m] 20
  Minimum operating depth [mm] 783
  Speed [rpm] 2,850
  Min. drill hole diameter [mm] 110
Ambient conditions
  Ambient temperature - min. [°C] 0
  Ambient temperature - max. [°C] 35
Safety feature
  Type of protection IP68
  Protection class I
Control box
  Connection plug CEE 7/7
  Cable length control box [m] 0.94
  Protection type of the control box IP44
Housing design
  Stainless steel
Functions and features
  ON/OFF switch
  Thermal overload protection
  Thermal overload protection [° C] 100
  Backflow preventer – opt Backflow preventer
  Valve
  Stainless steel screws
  Use of a suspension cord
  Suitable for both permanent operation (>10h) or salt-water operation
  Continuous operation
  Threaded connection 1 1/4"
Dimensions
  Length (packaging excluded) [mm] 100
  Width (packaging excluded) [mm] 92
  Height (packaging excluded) [mm] 783
Weight
  (packaging excluded) [kg] 13.5

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...