The compact submerged clear water pump TWP 4005 E wows homeowners and passionate amateur gardeners alike with its high capacity and the user-friendly handling characteristics. The maximum feed rate of 7,000 litres per hour recommends the TWP 4005 E as much as the extraordinary pump height of 7.5 metres. An integrated check valve prevents the return flow upon switch-off. 

With its powerful and maintenance-free 400 W motor the submerged clear water pump TWP 4005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. The submerged pump drains flooded basements and laundry facilities at a remarkable speed. It can be used to empty swimming pools in a trice and further leaves a good impression when pumping over the water in cisterns and rain barrels that are full to the brim. An integrated backflow preventer keeps the hose from running dry after shutdown and so reduces the time to restart suction.

A residual water level of no more than 3 mm – simply mop it up and you're done!

Moreover, the clear water pump is ideally suited for drying shallowly flooded surfaces f.i. in basements or swimming pools quickly and thoroughly. For the near-ground suction of the TWP 4005 E needs a water level of no more than 80 mm to start the internal pump wheel. Then the device pumps level ground "wipe-dry", i.e. to a residual water level of only 3 mm.

The watertight (encapsulation) and impact-resistant plastic housing of the device is suitable for underwater application to an immersion depth of 7 metres. With the integrated thermal protection circuit activated by overheating of the device the pump is also perfectly equipped for time-consuming applications. The high-quality ceramic face seal and a low-wear shaft further ensure extreme durability.