TWP 4025 E

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged waste water pumps
  6. TWP 4025 E

Submerged waste water pump TWP 4025 E

Powerful suction plus effectiveness – the ideal solution for house and garden

Contaminated water in the house, garden or well should be pumped off as quickly and as effectively as possible – the thoroughly robust and powerful submerged waste water pump TWP 4025 E is perfectly suited for this purpose. It meets every challenge and transports water containing dirt particles sized up to 25 millimetres.

The submerged waste water pump TWP 4025 E reliably transports up to 7,500 litres of contaminated water per hour up to a pump height of 5 metres with a power consumption of 400 W. Flooded basements and living spaces are quickly rendered accessible again, and building or waste water pits can be emptied just as effectively as ponds, tanks or cisterns. Thanks to the pump's high conveying capacity, water can be quickly and easily withdrawn from lakes, ponds or rivers for lawn sprinklers or complex irrigation systems. Naturally, the submerged pump TWP 4025 E is also suited for transporting clear water.

Robust and durable quality

The TWP 4025 E is also perfectly equipped for long-term applications, for the device comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.

Starting and residual water level

The watertight (encapsulation) and impact-resistant plastic housing of the TWP 4025 E is suitable for underwater application to an immersion depth of 5 metres. The robust pump can be put into operation as of a water level of only 90 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm.

With a pump height of up to 5 metres, the pump is able to transport water from a flooded basement to the next higher floor and thus out of the house.

The TWP 4025 E combines functional variety with easy handling

The steplessly lockable float switch of the TWP 4025 E offers the option to choose between automatic and manual continuous operation. In automatic mode, the device is switched on or off depending on the preselected water level, while the dry run protection stops pump operation automatically if the water level drops too low. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.

With universal connections for inner diameters of 25 mm and 32 mm as well as with threaded connectors of 1'' and 1½'' further hose and also pipe connections can be established conveniently. The elbow's position can be set to various positions as desired so that it is possible for hoses and pipes to run parallel to the ground. The stable, ergonomic carrying handle additionally facilitates the handling of the compact submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to a 10 metre connecting cable the pump can be quickly installed, and using the suspension cord the pump can be easily lowered into the water and raised again when required.

Tested for safety, TÜV GS ID 1419045592

TÜV*-tested quality *(German Association for Technical Inspection)

With the TWP 4025 E you are always on the safe side, for this submerged waste water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

A few practical benefits:

  • Impressive 400 watts of power for pumping up to 7,500 litres per hour
  • Maximum pump height: 5 m
  • Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
  • For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Dry run protection during automatic operation
  • Fixing option for the float switch during automatic operation
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Large ergonomic carrying handle – suitable for fastening the lowering cable
  • Submerged pump of TÜV-tested quality
The submerged pump TWP 4025 E is supplied as complete set including reducer, elbow, a nylon cord of 12 m length and a 10 m power cable.
Scope of delivery for the submerged clear water pump TWP 4025 E

All important features at a glance

Clean water
Contaminated water
Powerful 400 W motor
Feed rate of 7,500 litres per hour
Pump height of 5 metres
Immersion depth: 5 metres
A water level of no more than 90 mm is sufficient for starting the device
The device continues to operate to a residual water level of 35 mm
Heavily contaminated water with particle sizes of up to 25 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
For the application after flooding
For the application in drainage shafts
For the application in garden ponds
 
 
 
 

Pump height and feed rate of the TWP 4025 E

Pump height and feed rate of the TWP 4025 E

Special equipment features of the TWP 4025 E

The submerged waste water pump TWP 4025 E conveys heavily contaminated water with particle sizes of up to 25 millimetres.
Particle size: 25 mm
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Ceramic face seal
The elbow’s position can be freely adjusted, as a result it is possible for hoses and pipes to run parallel to the ground.
Adjustable elbow
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1‘‘ / 1¼‘‘ / 1½‘‘ threaded connectors can be flexibly coupled with the pump.
Universal connections
The float can be fastened in any position, this increases the flexibility when setting the switch-on/switch-off point. It also constitutes a dry run protection.
Steplessly adjustable float switch
When locking the float switch in horizontal position, the pump operates continually and sucks off the water to a level of 35 mm.
Continuous suction operation to a level of 35 mm
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Ergonomic carrying handle
TWP 4025 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, pump height and submersion depth.
Schematic overview


Whether waste or clear water – the submerged pump TWP 4025 E won't let you down

Up to an immersion depth of 5 metres, the submerged pump TWP 4025 E is ideally suited for all applications in contaminated water.
Suitable to an immersion depth of 5 metres
Water volumes even of larger garden ponds can be pumped off quickly and easily at a rate of up to 7,500 litres per hour.
Perfect for draining ponds
With a pump height of up to 5 m the submerged waste water pump TWP 4025 E is ideally suited for emptying manholes or drainage shafts.
For the application in manholes and drainage shafts
Pumping off or recirculating the clear or contaminated water from cisterns or rain barrels can be accomplished in a trice.
For clear and contaminated water in rain barrels

Shop

Submerged waste water pump TWP 4025 E show in Trotec online shop

Submerged waste water pump TWP 4025 E

Contaminated water in the house, garden and well should be pumped off as quickly and effectively as possible. The robust and powerful submerged waste water pump TWP 4025 E is the perfect solution. It transports water with up to 25 millimeter dirt particles.

You save: 45 %

50.53 £ 27.55 £ incl. VAT
Show net price (VAT not included)

buy

Details

Technical data
General information
  Article number 4.610.000.015
Electrical values
  Mains connection 230 - 240 V/50 Hz
  Power input [kW] 0.4
Electric connection
  Connection plug CEE 7/4 (Schuko plug type F)
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 7,500
  Grain size [mm] 25
  Delivery head max. [m] 5
  Immersion depth max. [m] 5
  Minimum operating depth [mm] 90
  Water level extraction height max. [mm] 35
  Water temperature max. [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On-/Off switch Automatic
  Switch-on point float switch 450
  Switch-off point float switch 210
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for salt water operation or permanent operation (> 10h)
Housing design
  Plastic
  Aluminium
  Stainless steel
  Steel
Accessories scope of delivery
  Adapter
  Hose connection (inner diameter) 25 / 32 mm
  Thread connection 1"; 1 ½"
  Backflow preventer
  Nylon rope tear resistant 12 m
Dimensions
  Length (packaging excluded) [mm] 160
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 310
Weight
  (packaging excluded) [kg] 3.7

 standard equipment

 optionally available

 not available

Alternative products

TWP 4025 E with alternative products:

start comparison
TWP 4005 E Submerged Clear Water Pump show in Trotec online shop

TWP 4005 E Submerged Clear Water Pump

The compact submerged clear water pump TWP 4005 E impresses both homeowners and passionate amateur gardeners with its power and user-friendliness. The max. conveying capacity of 7,000 l/h also speaks for the TWP 4005 E as well as the extraordinary discharge height of 7.5 meters.

You save: 45 %

50.53 £ 27.55 £ incl. VAT
Show net price (VAT not included)

buy

Submerged Waste Water Pump TWP 7025 E show in Trotec online shop

Submerged Waste Water Pump TWP 7025 E

This power house reliably pumps the water with up to 25 mm dirt particles up to a discharge height of 9 meters. It also makes it easy to move the water into the next higher floor and thus out of the house in the case of submerged basements after flooding.

You save: 46 %

68.94 £ 36.75 £ incl. VAT
Show net price (VAT not included)

buy

Accessories

Quality extension cable 15 m / 230 V / 1.5 mm² show in Trotec online shop

Quality extension cable 15 m / 230 V / 1.5 mm²

The indispensable accessory for electric heaters, dehumidifiers, air conditioners and more: PVC extension cable with a length of 15 m and a supply voltage of 230 V. Perfect for home use!

You save: 50 %

27.55 £ 13.74 £ incl. VAT
Show net price (VAT not included)

buy

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany show in Trotec online shop

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany

The essential accessories for electric heaters, humidifiers, air-conditioning units etc.: Pro extension cable at a length of 20 m and with a supply voltage of 230 V. All that and it's made in Germany!

32.14 £ incl. VAT
Show net price (VAT not included)

buy

Seminars

Downloads

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (IT)

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (IT)

TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-IT.pdf (2.3 MB)

Download

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (TR)

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (TR)

TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-TR.pdf (2.3 MB)

Download