TWP 7025 E

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged waste water pumps
  6. TWP 7025 E

Submerged waste water pump TWP 7025 E

Handles even high feed rates with power and reliability

The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour.

Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.

A remarkable pump capacity – from 7 metres down to 35 mm

Starting and residual water level

The thoroughly robust submerged pump is accommodated in a watertight encapsulated and impact-resistant plastic housing and is suitable for underwater application to an immersion depth of 7 metres. The pump can start operation as of a minimum operating depth of 115 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm. Besides water withdrawal for operating a garden irrigation system, water removal after flooding and other fields of application involving contaminated water, the TWP 7025 E is also suited for transporting clear water.

Above that, the compactly designed TWP 7025 E is perfectly equipped for long-term applications, for the pump comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.

Whether in automatic or manual mode – the TWP 7025 E always guarantees optimal handling

Due to its steplessly lockable float switch, the TWP 7025 E allows you to choose between automatic mode and manual continuous operation. In automatic mode, the device is switched on or off depending on the preselected water level, while the dry run protection stops pump operation automatically if the water level drops too low. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.

The flexible elbow, which can be set to various positions as required to allow for hoses and pipes to run parallel to the ground, is fitted with universal connections for 25 mm and 32 mm inner diameters as well as with 1" and 1½" threaded connections. A stable, ergonomic carrying handle additionally facilitates the handling of the powerful submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to the 10 metre connecting cable the pump can be quickly installed, and using the suspension cord it can be easily lowered into even great depths and raised again when required.

Tested for safety, TÜV GS ID 1419045592

Best quality guarantee

With the TWP 7025 E you are always on the safe side, for this submerged waste water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

A few practical benefits:

  • Impressive 750 watts of power for pumping up to 13,000 litres per hour
  • Maximum pump height: 9 m
  • Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
  • For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Dry run protection during automatic operation
  • Fixing option for the float switch during automatic operation
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Large ergonomic carrying handle – suitable for fastening the lowering cable
  • Submerged pump of TÜV-tested quality
The submerged pump TWP 7025 E is supplied as complete set including reducer, elbow, a nylon cord of 12 m length and a 10 m power cable.
Scope of delivery for the submerged clear water pump TWP 7025 E

All important features at a glance

Clean water
Contaminated water
Powerful 750 W motor
Feed rate of 13,000 litres per hour
Pump height of 9 metres
Immersion depth: 7 metres
A water level of no more than 115 mm is sufficient for starting the device
The device continues to operate to a residual water level of 35 mm
Heavily contaminated water with particle sizes of up to 25 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
For the application after flooding
For the application in drainage shafts
For the application in garden ponds

Pump height and feed rate of the TWP 7025 E

Pump height and feed rate of the TWP 7025 E

Special equipment features of the TWP 7025 E

The submerged waste water pump TWP 7025 E conveys heavily contaminated water with particle sizes of up to 25 millimetres.
Particle size: 25 mm
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Ceramic face seal
The elbow’s position can be freely adjusted, as a result it is possible for hoses and pipes to run parallel to the ground.
Adjustable elbow
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1‘‘ / 1¼‘‘ / 1½‘‘ threaded connectors can be flexibly coupled with the pump.
Universal connections
The float can be fastened in any position, this increases the flexibility when setting the switch-on/switch-off point. It also constitutes a dry run protection.
Steplessly adjustable float switch
When locking the float switch in horizontal position, the pump operates continually and sucks off the water to a level of 35 mm.
Continuous suction operation to a level of 35 mm
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Ergonomic carrying handle
TWP 7025 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, pump height and submersion depth.
Schematic overview

TWP 7025 E - the power pack among the submerged pumps

Up to an immersion depth of 7 metres, the submerged pump TWP 7025 E is ideally suited for all applications in contaminated water.
Suitable to an immersion depth of 7 metres
With a pump height of up to 9 m the submerged waste water pump TWP 7025 E is ideally suited for emptying deep manholes or drainage shafts.
For the application in deep manholes and drainage shafts
Water volumes even of large garden ponds can be pumped off quickly and easily at a rate of up to 13,000 litres per hour.
Perfect for draining ponds
Pumping off or recirculating the clear or contaminated water from cisterns or rain barrels can be accomplished in a trice.
For clear and contaminated water in rain barrels


Submerged Waste Water Pump TWP 7025 E show in Trotec online shop

Submerged Waste Water Pump TWP 7025 E

This power house reliably pumps the water with up to 25 mm dirt particles up to a discharge height of 9 meters. It also makes it easy to move the water into the next higher floor and thus out of the house in the case of submerged basements after flooding.

You save: 46 %

68.94 £ 36.75 £ incl. VAT
Show net price (VAT not included)



Technical data
General information
  Article number 4.610.000.055
Electrical values
  Mains connection 230 - 240 V/50 Hz
  Power input [kW] 0.75
Electric connection
  Connection plug CEE 7/4 (Schuko plug type F)
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 13,000
  Grain size [mm] 25
  Delivery head max. [m] 9
  Immersion depth max. [m] 7
  Minimum operating depth [mm] 115
  Water level extraction height max. [mm] 35
  Water temperature max. [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On-/Off switch Automatic
  Switch-on point float switch 500
  Switch-off point float switch 250
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for salt water operation or permanent operation (> 10h)
Housing design
  Stainless steel
Accessories scope of delivery
  Hose connection (inner diameter) 25 / 32 mm
  Thread connection 1" / 1 ½"
  Backflow preventer
  Nylon rope tear resistant 12 m
  Length (packaging excluded) [mm] 220
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 355
  (packaging excluded) [kg] 5.2

 standard equipment

 optionally available

 not available

Alternative products

TWP 7025 E with alternative products:

start comparison
Submerged waste water pump TWP 4025 E show in Trotec online shop

Submerged waste water pump TWP 4025 E

Contaminated water in the house, garden and well should be pumped off as quickly and effectively as possible. The robust and powerful submerged waste water pump TWP 4025 E is the perfect solution. It transports water with up to 25 millimeter dirt particles.

You save: 45 %

50.53 £ 27.55 £ incl. VAT
Show net price (VAT not included)



Quality extension cable 15 m / 230 V / 1.5 mm² show in Trotec online shop

Quality extension cable 15 m / 230 V / 1.5 mm²

The indispensable accessory for electric heaters, dehumidifiers, air conditioners and more: PVC extension cable with a length of 15 m and a supply voltage of 230 V. Perfect for home use!

You save: 50 %

27.55 £ 13.74 £ incl. VAT
Show net price (VAT not included)


Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany show in Trotec online shop

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany

The essential accessories for electric heaters, humidifiers, air-conditioning units etc.: Pro extension cable at a length of 20 m and with a supply voltage of 230 V. All that and it's made in Germany!

32.14 £ incl. VAT
Show net price (VAT not included)




Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (IT)

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (IT)

TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-IT.pdf (2.3 MB)


Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (TR)

Operating manual Submerged waste water pump TWP 4025 E / TWP 7025 E (TR)

TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-TR.pdf (2.3 MB)